Battery Bus Bars for High Performance Vehicles

Battery Bus Bars for High Performance Vehicles

Battery Bus Bars are an essential component for high performance electric vehicles (EV's). The purpose of this accessory is to supply a constant voltage source and discharge to the battery. Many companies produce Battery Bus Bars for EV's and other high performance vehicles such as trucks, cars, performance vehicles, all types of motorcycles and boats. Most companies who make this accessory also have an accessory line for accessories such as throttle bodies.

Vehicles use a system of batteries to supply the electric power necessary for the vehicle to operate. When the vehicle reaches a voltage requirement, the vehicle battery's ability to deliver adequate current is depleted. To compensate for this, the vehicle alternator supplies additional current to the battery. This additional current is required so the vehicle can operate on the amount of battery power remaining. Without an efficient battery charge/discharge system, the amount of available battery power is severely limited.

Battery Bus Bars help to provide a high performance environment for EV's by allowing complete system integration. It is very easy to install these accessories to most vehicles. No modifications to the engine are needed for use with Battery Bus Bars. These products are made of lightweight, high performance aluminum which ensures long lasting durability.

Battery Bus Bars allow for a high level of battery voltage and current regulation. They also offer a high level of safety because they prevent shorting out the charging system by keeping the terminals closed. The close circuit systems offer a higher degree of safety than traditional bus bars because there are no metal traces on the surface of the terminal connections that could be mistaken for a connection. The close circuit systems are more efficient at delivering power and voltage to the battery packs because they limit the current to the battery and do not exceed the battery's limits. The close circuit system allows for the safe and reliable transfer of power from the alternator to the battery.

Many vehicles use a single battery system in the front of the vehicle, such as an Oldsmobile Moped or Honda Civic. These vehicles use single 12 volt battery bus bars to supply the electrical power to all of the electronics and instruments in the vehicle. These single battery bus bars are commonly sold in sets of four. Some people may find it useful to replace their existing batteries with these bar sets. The ability to replace the entire battery's bus with a single set of bus bars will greatly reduce the amount of required current or power that the vehicle uses, thus extending the vehicle's useful life.

Most high performance vehicles use a series of high performance Lipo batteries in their electrical systems. The Lipo batteries are made from high density Liposome form a material that is similar to the human egg. These type of batteries are extremely powerful, have a large charge capacity, but also have very low self discharge. The benefit to using a series set of high discharge batteries is that the electrical systems require only one type of discharge to operate and you will see significant improvement in your gas mileage. In addition, when you use more than one set of these battery packs, each pack will utilize a charge level that is relative to the discharge levels from before.

Tags:battery bus bars copper | energy storage battery | lifepo4 battery